Commercial Exterior Repaint

Weathered paint and a dated color scheme were holding this commercial building back. Our crew washed and prepped every surface, then brought the exterior back with a fresh body color, crisp accent bands, and a durable finish.

Overview

This project covered the full exterior of a single-story commercial building. The work started with a thorough wash and surface prep, moved through protecting windows and entries and priming where needed, and finished with new coats on the walls, accent bands, and trim.

Project Type

Commercial Exterior Painting

Scope of Work

Washing, Prep, Prime & Finish Coats

Property Type

Commercial Building

Location

Indianapolis, IN

The Goals

Project Requirements

The building needed to stay presentable and accessible while the work was underway, and the new finish had to stand up to sun, rain, and winter weather.

Key requirements:

Remove dirt, chalking, and loose paint before coating
Protect windows, doors, signage, and landscaping
Refresh the main wall color and accent bands
Keep entries and walkways safe during the work
Deliver clean, straight lines at every color change

Our Approach

We worked in planned sections so the building could stay in use, and used lifts to reach the upper walls and parapets safely.

How we handled the work:

Pressure-washed all exterior surfaces
Masked off glass, doors, and fixtures
Spot-primed bare and repaired areas
Applied finish coats to walls, bands, and trim
Walked the property and touched up before cleanup

Before and After Results

Conclusion

The finished exterior looks clean, consistent, and professional, with a coating built to protect the building for years. If your commercial property is due for a refresh, we can walk the site with you and put together a clear estimate.